Aqua Master P700 Pro 2 Combo Meter

Continuous Monitoring of pH, Nutrient Strength, and Temperature

Please note: This item is a special order and may take an additional 2 days for shipping.

Easily monitor your pH, nutrient strength, and temperature with this all-in-one combo meter. Designed for continuous use, simply keep the electrodes submerged in the nutrient solution you're managing.

The device features a low battery indicator and a calibration alert, ensuring ongoing accuracy. With automatic temperature compensation, your pH readings will always be precise. The updated software delivers faster, more accurate measurements. Its large display and simple controls make it easy to operate and read your results at a glance.

Built for durability, this meter features a waterproof, rugged housing and replaceable electrodes. It comes calibrated and includes a rechargeable battery.

Key Features:

• Measures pH, nutrient strength (EC, CF, PPM), and temperature (°C/°F)
• Fully calibrated and ready to use
• Waterproof to IP65 (electrodes are IP67 waterproof)
• Long-lasting design with replaceable electrodes
• Automatic temperature compensation for precise pH readings
• Low battery and calibration indicators
• Designed for continuous operation

Note: Frequent calibration is required, and electrodes should be kept clean. Check for algae deposits on the electrodes. Replaceable electrodes are available.

---

Technical Specifications:

• Range:

  • pH: 0.0 – 14.0 pH
  • EC: 0.0 – 19.9 mS/cm
  • CF: 0.0 – 199 CF
  • PPM: 0 – 1999 PPM
  • Temperature: 0°C – 50°C (32°F – 122°F)

• Resolution:

  • pH: ± 0.1 pH
  • EC: 0.1 mS/cm
  • CF: 0.1 CF
  • PPM: 10 PPM
  • Temperature: 0.1°C (1.0°F)

• Accuracy:

  • pH: ± 0.1 pH
  • EC: ± 2% F.S.
  • CF: ± 2% F.S.
  • PPM: ± 2% F.S.
  • Temperature: ± 0.5°C (32°F)

• Temperature Compensation:

  • 0°C – 50°C (32°F – 122°F)

• PPM Scale:

  • 700 PPM

• Calibration:

  • pH: 2-point auto calibration (4.0 – 7.0 pH)
  • EC: 1-point auto calibration (1.4 – 3.0 – 12.88 EC)

• Battery:

  • DC 6V with rechargeable battery

• Dimensions:

  • 200 x 140 x 34 mm

• Weight:

  • 418 grams

---

How to Use:

1. Plug the power supply into a wall outlet and connect the USB cable to the meter.
2. Attach the pH and EC electrodes to the meter.
3. Remove the protective caps from the electrodes.
4. Turn the meter on.
5. Immerse the electrodes in the liquid to be tested and stir gently until the readings stabilize.
6. Press the C/F key to switch between Celsius and Fahrenheit.
7. Press the MODE key to toggle between EC/CF and PPM measurements.
8. Turn off the meter when finished.
9. Clean the electrodes with tap water to prevent contamination.
10. Replace the protective caps on the electrodes.

Note: Regular calibration is required, and electrodes should be kept clean. Look out for algae buildup on the electrodes. Replaceable electrodes are available.