Aqua Master S300/E300 Pro 2 Substrate Meter

Aqua Master Substrate EC/Temp E300 Pro

The E300 Pro is the perfect tool for measuring the EC and temperature of coconut soil, as well as other moist, soft substrates and liquids. Featuring a modern, durable design with user-friendly controls, the E300 Pro comes equipped with a high-quality EC electrode. It is delivered fully calibrated and includes batteries for immediate use.

How to use the meter:

1. Connect the electrode’s PIN connector to the EC meter.
2. Rinse the electrode with running water and dry it with clean kitchen paper.
3. Press the power button to turn on the meter.
4. Immerse the electrode into the (soft) substrate (ensure the substrate is sufficiently wet or damp, as dry substrates will affect accuracy) or liquid you wish to measure.
5. Wait for the reading to stabilize. Once it does, the measurement is complete.
6. Press the HOLD button to store the reading. Remember to press HOLD again when you are ready to take another measurement.
7. After use, rinse the electrode with clean water to remove any residue.
8. Turn off the meter by pressing the power button.

Aqua Master Substrate pH/Temp S300 Pro 2

The S300 Pro 2 is the perfect device for measuring pH and temperature in coconut soil, as well as other moist, soft substrates and liquids. This meter boasts a modern, durable design and user-friendly buttons. It comes equipped with a high-quality pH electrode and is fully calibrated upon delivery, including batteries for immediate use.

How does the meter work?

1. Attach the pH electrode's BNC connector to the meter, and remove the protective cap with the storage solution.
2. Rinse the electrode under running water and gently dry it with clean kitchen paper.
3. Press the power button to turn on the meter.
4. Submerge the electrode into the damp (or liquid) substrate you wish to measure. Ensure the substrate is well-moistened for accurate readings.
5. Wait for the reading to stabilize. The measurement is now complete.
6. Press the HOLD button to store the result. Remember to press the HOLD button again when you want to take a new measurement.
7. After use, rinse the electrode with clean water to remove any residue, and return the electrode to its protective cap containing storage solution.
8. Finally, press the power button to switch off the meter.